ESBE Thermostatic Mixing Valves are licensed for use with washbasins, showers and baths in higher risk and Healthcare applications under the requirements of the NHS Estates D08 specification. 
ESBE thermostatic mixing valves are available in standard format 15mm  and 22mm, and VTA353 is available in Combi format. 
Available in T pattern (VTA353) but also L pattern(VTA323)- saving  customers 40% installation time.  Combi versions are supplied complete with 4-in-1 angle inlet connectors  incorporating stainless steel mesh strainers, non return valves, 1/4”BSP  pressure tapping point and 1/4-turn lever ball valves.
USES ESBE thermostatic mixing valves are ideal for reducing temperatures in any situation where normal hot water at 60°C may accidentally scald and cause serious burns. Used in showers, basins and baths, they ensure washing safety in schools, sports centres, factories, prisons, and many other venues.
Pressure Class:    
PN10 Working Pressure:    
10 Bar Differential Pressure:    
Max 3 Bar Media Temperature:  
Max 95°c Temperature Stability:    
± 2°c * Connection:   External Thread (G) 1” 
Compression fitting (CPF) * Valid at unchanged hot/cold water pressure, minimum flow rate 4l/min. Minimum temperature differential between hot water inlet and mixed water outlet of 10°C   
APPLICATIONS Certified for healthcare use under the following requirements:
- HP/LP-S: High / Low pressure shower.
- HP/LP-W: High / Low pressure washbasin.
- HP-T44: High pressure bath fill up to 44°C.
- HP-T46: High pressure bath fill up to 46°C